The INOVA HIGHTECH MEP 805B / 806B  Autostarter Kit is a great add on for your MEP Generator Set. It will allow remote start with the flip off a switch or it can be connected to an Automatic Transfer Switch.

NOTE: These units are custom-made, based on the model generator you have. A lead-time of 14-21 days is required from the time you place your order. Please state which model generator you have in the comments section during your checkout as there are small customizations that must be made for final manufacture. In addition, please include the answers to the following questions in your order notes:

  • Does your generator have a Color (Version 2 or 3) or Monochrome (Version 1) Display?
  • If Color Display, when does your Genset excite the system?
    • a) Version 2: Happens automatically during start / cranking.
    • b) Version 3: has to be manually excited after Generator started successfully by moving the Start/Stop/Run Switch from Run back to Start for 2 to 4 seconds.

Installation / Operating Manual MEP 805B / 806B:

Manual depends on your Version and you will receive a download link after purchase.

If you need the Manual prior to placing an Order then please contact us with your Verion of your System on your MEP per test above 

and contact us here - Thank You 


The MEP 805B / 806B  Autostarter has the following features which can be set with the DIP Switch on the Board:

DIP Switch 1:   Regular Fuel / Aux Fuel
DIP Switch 2:   Warm Up Time 1 min or 5 min
DIP Switch 3:   Cool Down 4 min, 12 min or 30 min
DIP Switch 4:   Not Used
DIP Switch 5:   Not used

The 805B/806B Software affects/changes the following functions / Terminal Nomenclature:

1. Dip Switch Functions, Settings and Timing
2. Different Connections between the Board and the Cubicle
3. No external Contactor needed [utilizing internal K1 Contactor]
4. No Pre Heat - No Ether Injection
5. Fault Reset for 3 seconds
6. No ambient temperature dependent timing
7. Oil Pressure Input is connected to Relay K15 Terminal B and will stop Cranking the Engine when this Input goes low.
    Maximum Crank Time is 15 seconds - if engine RPM Sensor does not detect a running engine within 15seconds then the
    unit will go into fault mode indicated by a blinking LED AUX Fuel. Reset by pulling the DC Breaker on your Genset for
    about 5 seconds.

The installation is not very difficult for the do it your self-er.

The MEP 805B / 806B Autostarter KIT includes:

1. MEP 805B / 806B Autostarter Circuit Board
2. MIL-I-46058C Conformal Coating
3. Drill / Mounting Templates
4. Detailed Installation Manual
5. 24 feet 16ga standard multi stranded SXL wire, strong resistance to moisture, solvents and prolonged high heat -
    Thick wall special purpose automotive wire is insulated with chemically cross-linked polyethylene. Withstands prolonged temperatures of up to 257°F
6. Mounting Hardware [Stainless Steel Phillips Pan Head Machine Screws #6-32x0.75", Stainless Steel #6-32 Nuts as Spacers, Stainless Steel #6-32 K-Lock Nut's]
7. Crimp On Ring Lugs
8. A 60 Day Money Back Guarantee
9. 1 Year Limited Warranty

Not included in this KIT:
4 Pole Receptacle
4 Pole Connector with 16 ga wire

You can purchase these item separate or you may have them already. We have recommended the above items in our manual with manufacturer part number.

Write a review

Note: HTML is not translated!
    Bad           Good

Auto / Remote Starter Kit for Generator MEP 805B / 806B

  • Product Code: AUTOSTART MEP805B806B
  • Availability: Pre-Order
  • $2,099.99

  • Ex Tax: $2,099.99

Available Options

Tags: Auto / Remote Starter Kit for Generator MEP 805B / 806B