• Auto / Remote Starter Kit for Generator MEP 805A / 806A

The INOVA HIGHTECH MEP 805A / 806A Autostarter Kit is a great add on for your MEP Generator Set. It will allow remote start with the flip off a switch or it can be connected to an Automatic Transfer Switch.

Installation / Operating Manual MEP 805A/806A:
 

 

The Autostarter Board KIT for the 805A/806A is the same as for the 002A/003A

 

Except that the 805A/806A version has a different Software loaded!

 

The 805A/806A Software affects/changes the following functions / Terminal Nomenclature:

 

1.             Dip Switch Functions, Settings and Timing

2.             Different Connections between the Board and the Cubicle

3.             No external Contactor needed [utilizing internal K1]

4.             No Pre Heat - Pre Heat Output is used for Ether Injection instead

5.             Ether Injection selectable On/Off with 5 sec or 15 sec of injection time

                Select Ether Injection only if your Ether system is working correctly!

6.             No ambient temperature dependent timing

7.             The Aux Fuel Output is now used to fill the Day Tank for 30 or 60 seconds and to pressurize the fuel system

8.             The RUN/PRIME Output is now only a RUN OUTPUT

9.             The Oil P / TEMP Input will now additionally monitor Over Voltage and Low Fuel, besides Oil Pressure and Over Temperature

All other instructions from the MEP 002A/003A Manual apply for these Gen Sets as well

 


The MEP 805A / 806A Autostarter has the following features which can be set with the DIP Switch on the Board:

DIP Switch Settings 805A / 806A

DIP SWITCH

Function

DIP SWITCH ON POSITION

DIP SWITCH OFF POSITION

1

DAY TANK FILL (Prime)

1 min (60 sec)

30 sec

2

Warm Up

5 min (300 sec)

1 min (60 sec)

3

Cool Down

DIP2 OFF 06 min (360 sec)

DIP2 ON 10 min (600 sec)

DIP2 OFF 02 min (120 sec)

DIP2 ON 06 min (360 sec)

4

Ether Injection

YES

NO

5

Ether Injection Time

15 sec

5 sec


The Autostarter will automatically shut down and display a light indicator in the event of a Low Oil Pressure, Overheat, Over Voltage and Low Fuel situation, preventing the Generator Set from automatically restarting. The Autostarter can easily be reset, once the issues of leading to Low Oil Pressure, Overheat, Over Voltage and Low Fuelsituation have been fixed/corrected.

The installation requires a working knowledge of the MEP 804A/805A Electrical System.

The MEP 805A / 806A Autostarter KIT includes:

1. MEP 805/806 Autostarter Circuit Board
2. MIL-I-46058C Conformal Coating
3. Drill / Mounting Templates
4. Detailed Installation Manual
5. 25 feet 16ga standard multi stranded SXL wire, strong resistance to moisture, solvents and prolonged high heat -
    Thick wall special purpose automotive wire is insulated with chemically cross-linked polyethylene. Withstands prolonged temperatures of up to 257°F
6. Mounting Hardware [Stainless Steel Phillips Pan Head Machine Screws #6-32x0.75", Stainless Steel #6-32 Nuts as Spacers, Stainless Steel #6-32 K-Lock Nut's]
7. Crimp On Ring Lugs
8. A 60 Day Money Back Guarantee
9. 1 Year Limited Warranty


 

Write a review

Note: HTML is not translated!
    Bad           Good

Auto / Remote Starter Kit for Generator MEP 805A / 806A

  • Product Code: MEPKIT805A/806A
  • Availability: Pre-Order
  • $409.45

  • Ex Tax: $409.45

Available Options


Related Products

Time Delay OFF Relay Kit " K ext. " MEP 8xx

Time Delay OFF Relay Kit " K ext. " MEP 8xx

Time Delay OFF Relay - for MEP 8xx Series or any other use where a 24 VDC Time Delay Off Relay is ne..

$79.95 Ex Tax: $79.95

Tags: Auto / Remote Starter Kit, MEP 805A / 806A,