The INOVA HIGHTECH MEP 004A / 005A / 006A Autostarter Kit is a great add on for your MEP Generator Set. It will allow remote start with the flip off a switch or it can be connected to an Automatic Transfer Switch.

INOVA HIGHTECH MEP 005A Autostarter Kit installed by our customer Richard Sanderson II of Clear Communications, Inc. in New Orleans, who was also so kind to provide us with these two videos, in conjunction with a Cumins Power Command ATS to provide Emergency Backup for his business Clear Communications, Inc.


 

 


Installation / Operating Manual:
 

 

The Autostarter Board KIT for the 004A/005A/006A is the same as for the 002A/003A

 

Except that the 004A/005A/006A version has a different Software loaded!

 

The 004A/005A/006A Software affects/changes the following functions / Terminal Nomenclature:

 

1.             Dip Switch Functions, Settings and Timing

2.             Different Connections between the Board and the Cubicle

3.             No external Contactor needed [utilizing internal CB2]

4.             No Pre Heat - Pre Heat Output is used for Ether Injection instead

5.             Ether Injection selectable On/Off with 5 sec or 15 sec of injection time

                Select Ether Injection only if your Ether system is working correctly!

6.             No ambient temperature dependent timing

7.             The Aux Fuel Output is now used to fill the Day Tank for 30 or 60 seconds and to pressurize the fuel system

8.             The RUN/PRIME Output is now only a RUN OUTPUT

9.             The Oil P / TEMP Input will now additionally monitor Over Voltage and Low Fuel, besides Oil Pressure and Over Temperature

All other instructions from the MEP 002A/003A Manual apply for these Gen Sets as well

 


The MEP 004A / 005A / 006A Autostarter has the following features which can be set with the DIP Switch on the Board:

DIP Switch Settings 004A / 005A / 006A

DIP SWITCH

Function

DIP SWITCH ON POSITION

DIP SWITCH OFF POSITION

1

DAY TANK FILL (Prime)

1 min (60 sec)

30 sec

2

Warm Up

5 min (300 sec)

1 min (60 sec)

3

Cool Down

DIP2 OFF 06 min (360 sec)

DIP2 ON 10 min (600 sec)

DIP2 OFF 02 min (120 sec)

DIP2 ON 06 min (360 sec)

4

Ether Injection

YES

NO

5

Ether Injection Time

15 sec

5 sec


The Autostarter will automatically shut down and display a light indicator in the event of a Low Oil Pressure, Overheat, Over Voltage and Low Fuel situation, preventing the Generator Set from automatically restarting. The Autostarter can easily be reset, once the issues of leading to Low Oil Pressure, Overheat, Over Voltage and Low Fuelsituation have been fixed/corrected.

The installation requires a working knowledge of the MEP 004A/005A Electrical System.

The MEP 004A / 005A / 006A Autostarter KIT includes:

1. MEP 004/005/006 Autostarter Circuit Board
2. MIL-I-46058C Conformal Coating
3. Drill / Mounting Templates
4. Detailed Installation Manual
5. 15 feet 16ga standard multi stranded SXL wire, strong resistance to moisture, solvents and prolonged high heat -
    Thick wall special purpose automotive wire is insulated with chemically cross-linked polyethylene. Withstands prolonged temperatures of up to 257°F
6. Mounting Hardware [Stainless Steel Phillips Pan Head Machine Screws #6-32x0.75", Stainless Steel #6-32 Nuts as Spacers, Stainless Steel #6-32 K-Lock Nut's]
7. Crimp On Ring Lugs
8. A 60 Day Money Back Guarantee
9. 1 Year Limited Warranty
10. 15 Amp Diode Pack


MEP004A installation Pictures of our Board Kit as courtesy of our Valued Customer AL HEIDEMANN of LODI, WI who installed one of our MEP 004A/005A/006A Autostarter Kits on his MEP004A Generator Set.
Al was instrumental in making this Kit possible for the MEP 004A/005A/006A Series! Thanks Al!

 

Write a review

Note: HTML is not translated!
    Bad           Good

Auto / Remote Starter Kit for Generator MEP 004A / 005A / 006A

  • Product Code: MEPKIT004A/005A/006A
  • Availability: Pre-Order
  • $409.45

  • Ex Tax: $409.45

  • 3 or more $379.95

Available Options


Related Products

Installation Manual for KIT MEP 002A / 003A

Installation Manual for KIT MEP 002A / 003A

Installation Manual for KIT MEP 002A / 003A Large PDF..

$0.00 Ex Tax: $0.00

Installation Manual for KIT MEP 004A / 005A / 006A

Installation Manual for KIT MEP 004A / 005A / 006A

Installation Manual for KIT MEP 004A / 005A / 006A The Installation Manual for the MEP 007A / 007..

$0.00 Ex Tax: $0.00

16ga White MIL-W-5086/2 Airframe Wire - Type 2

16ga White MIL-W-5086/2 Airframe Wire - Type 2

The original Wire for your Generator Set! Price is per foot! 10 Feet Minimum! &nbs..

$2.29 Ex Tax: $2.29

Time Delay OFF Relay Kit " K ext. " MEP X03/4/5/6

Time Delay OFF Relay Kit " K ext. " MEP X03/4/5/6

Time Delay OFF Relay - for MEP 004A / 005A / 006A / 103A / 104A / 105A or any other use where a 24 V..

$79.95 Ex Tax: $79.95

Installation Manual for Relay K ext. MEP 004A / 005A / 006A / 103A / 104A / 105A

Installation Manual for Relay K ext. MEP 004A / 005A / 006A / 103A / 104A / 105A

This Relay Kit is needed to disable the Self Holding Contact CB AUX off the CB 1 Contactor. This is ..

$0.00 Ex Tax: $0.00

ABB 65 Amp External Contactor with 24 VDC Coil

ABB 65 Amp External Contactor with 24 VDC Coil

Our recommended contactor for all MEP Units which have to have a external Contactor with a 65 A..

$229.95 Ex Tax: $229.95

ABB 80 Amp External Contactor with 24 VDC Coil

ABB 80 Amp External Contactor with 24 VDC Coil

Our recommended contactor for all MEP Units which have to have a external Contactor with a 80 Amp AC..

$299.95 Ex Tax: $299.95

5 PIN Male receptacle, M12/ 1/2" NPT, 5-pin

5 PIN Male receptacle, M12/ 1/2" NPT, 5-pin

We recoomed this 1/2" Thread 5 PIN male Receptacle to connect the Auto Start Board with your system:..

$29.95 Ex Tax: $29.95

5 PIN Female cordset, M12, PUR cable

5 PIN Female cordset, M12, PUR cable

We recommend this Cable to connect the Auto Start Board / 5 PIN Male Receptacle with your system: ..

$39.95 Ex Tax: $39.95

ABB 125 Amp External Contactor with 24 VDC Coil

ABB 125 Amp External Contactor with 24 VDC Coil

Our recommended contactor for all MEP Units which have to have a external Contactor with a 125 Amp A..

$399.95 Ex Tax: $399.95

5-pin Connecting cable, M12 to M12, PUR cable

5-pin Connecting cable, M12 to M12, PUR cable

We recommend this Cable to connect the Auto Start Board / 5 PIN Male Receptacle with your system: ..

$89.95 Ex Tax: $89.95

5-pin Female receptacle, M12/ 1/2" NPT,

5-pin Female receptacle, M12/ 1/2" NPT,

We recoomed this 1/2" Thread 5 PIN Female Receptacle to connect the Auto Start Board with your syste..

$29.95 Ex Tax: $29.95

MEP ATS Controller

MEP ATS Controller

MEP Generator Transfer System Controller This INOVA HIGHTECH Ltd. Kit allows you to Monitor your ..

$399.95 Ex Tax: $399.95

Tags: MEP Auto / Remote Starter Kit for Generator 004A / 005A / 006A