Time Delay OFF Relay Kit " K ext. " MEP X03/4/5/6

Time Delay OFF Relay Kit " K ext. " MEP X03/4/5/6
Time Delay OFF Relay Kit " K ext. " MEP X03/4/5/6 Time Delay OFF Relay Kit " K ext. " MEP X03/4/5/6
Brand: INOVA HIGHTECH Ltd.
Product Code: K ext. Kit MEP x03/4/5/6
Availability: In Stock
Price: $56.95

Available Options


* Relay K ext. Kit Capacitor:

Qty:     - OR -   Add to Wish List
Add to Compare

Time Delay OFF Relay - for MEP 004A / 005A / 006A / 103A / 104A / 105A or any other use where a 24 VDC Time Delay Off Relay is needed. This Relay Kit disconnects the self holding Contact CB AUX of the CB 1 Contactor during Automatic Operationes when the Generator enters the cool down phase.

This Relay Kit is needed to disable the Self Holding Contact CB AUX of the CB 1 Contactor. This is an optional Kit and should be purchased if you need to have Contactor K1 turn off during the cool down phase.

This Relay is a more economically priced solution for a Standard Timed Relay and is mechanically more rugged.

This Relay K ext. Kit can also be used if it becomes necessary to delay a switching function between two Relays or contactors.

 

Contact Rating:
Load Resistive Load (cosϕ = 1) Inductive load (cosϕ = 0.4,L/R = 7 ms)
Rated Load

110 VAC 10 A

24 VDC 10 A

110 VAC 7.5 A

24 VDC 5 A

Rated Carry Current 10 A 10 A

Max. switching

voltage

250 VAC

125 VDC

250 VAC

125 VDC

Max. switching current

10 A 10 A

Max. switching

power

1,100 VA

240 W

825 VA

120 W

Failure rate (reference value)*

100 mA, 5 VDC 100 mA, 5 VDC
*Note: P level: λ60 = 0.1 x 10-6/operation

D1: 3 Amp General Purpose Diode

D2: 3 Amp General Purpose Diode

Cx: Electrolytic Capacitor ( Values see table below )

K ext.: Industrial Grade Relay 24 VDC Panel Mount - DIN RAIL MOUNT is not available for this Relay

Cx Capacitor Value

DC 24 Volt (Normal Battery Voltage)

DC 27 Volt (Alternator Voltage)

4,700 uF / 50V (standard)

4.0 sec

6.5 sec

6,800 uF / 50V (upon request)

6.0 sec

9.0 sec

10,000 uF / 50V (upon request)

8.0 sec

12 sec

15,000 uF / 50V (upon request)

12 sec

18 sec

The Capacitor Cx will keep the Relay K ext. energized for the amount of time specified in the table above after Terminal 1 has been turned off. Diode D1 prevents a back feeding from the capacitor into the circuit connected to Terminal 1.

This circuit will only work properly with a 0V / GND supply on Terminal 7!

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
INOVA HIGHTECH Ltd. © 2018